Radio Operation - Toyota TNS350 Owner's Manual

— Radio operation

● Listening to the radio
1. Push the "SOURCE" button.
2. Touch these touch-screen buttons to
choose either an AM or FM station.
The system is switched to the AM or FM
mode.
If your vehicle is equipped with a digital
audio broadcast system, when you push
the "SOURCE" button and touch "DAB",
the system is switched to DAB mode.
Your radio automatically changes to stereo
reception when a stereo broadcast is
received. "ST" appears on the screen.
If the signal becomes weak, the radio
reduces the amount of channel separation
to prevent the weak signal from creating
noise. If the signal becomes extremely
weak, the radio switches from stereo
to mono reception.
disappears from the screen.
In this case, "ST"
● Presetting a station
1. Tune in the desired station.
2. Touch one of the channel selector
touch-screen buttons (1 — 6) you
want and hold it until a beep is
heard.
This sets the station to the touch-screen
button and the frequency appears on the
touch-screen button.
Each radio mode can store up to 6 stations.
To change the preset station to a different
one, follow the same procedure.
The preset station memory is cancelled
when the power source is interrupted by
battery disconnection or a blown fuse.
AUDIO SYSTEM
6