Changing Map Orientation And Configuration - Toyota TNS350 Owner's Manual

BASIC FUNCTION
● Operating in the push mode
Touch or
the map display. The scale bar and indicator
at the bottom of the screen indicates the
map scale menu. The scale range is 50 m
(50 yards) to 500 km (300 miles).
Touch or
changes normally. By continuing to touch
the touch-screen button, the scale bar
changes smoothly.
The scale of the map display can be
changed by touching the scale bar
directly.
If appears, you can change the map
scale to display the entire route to the next
destination by touching this touch-screen
button.
The map scale is displayed under the
North−up symbol, Heading−up symbol
or 2.5D map symbol at the top left of the
screen.
INFORMATION
When the map scale is at the maximum
range of 500 km (300 miles),
not shown. When the map scale is at
theminimum range of 50 m (50 yards),
is not shown.
40 TNS 350
to change the scale of
until the scale bar
— Changing map orientation
and configuration
 North-up screen
 Heading-up screen
 2.5D map
Touching the orientation symbol at the top
is
left of the screen changes the orientation
from North-up to Heading-up orientation,
and the configuration from 2D to 2.5D.