Removing The Chassis Assembly - JVC KS-F160 Service Manual

KS-F160
QQ
3 7 63 1515 0
Removing the head amplifier board
( See Fig. 12 )
1. Removing the front chassis.
2. Removing the bottom cover.
3. Removing the heat sink.
4. Removing the main board assembly.
5. Removing the cassette mechanism.
6. Remove the screw ( 6 ) retaining the head ampli-
fier board.
7. Shift the two inter rocking sections ( j ) securing
the head amplifier board in the direction shown by
the arrow "B" to remove the printed circuit board.
8. From the connector CJ901 on the head amplifier
board from connector wire out going to the head
relay board.

Removing the chassis assembly

( See Fig. 13 and 14 )
1. Removing the front chassis.
2. Removing the bottom cover.
TE
L 13942296513
3. Removing the heat sink.
4. Removing the main board assembly.
5. Removing the cassette mechanism.
6. Removing the head amplifier board.
7. Turn the left side to cassette mechanism.
8. Remove the screw ( 7 ) retaining the relay board.
9. Shift the one inter rocking sections ( k ) securing
the relay board in the direction shown by the
arrow "C" to remove the printed circuit board.
10. Turn the back side down, remove the four screws
( 8 ) retaining the chassis assembly.
www
1-6
http://www.xiaoyu163.com
Chassis assembly
x ao
y
. i
http://www.xiaoyu163.com
8
Head amplifier board
B
CJ901
j
j
To head relay board
Q Q
3 6 7 1 3
C
8
8
u163
.
2 9 9 4 2 8
6
Fig. 12
Relay board
1 5 0 5 8 2 9 9 4
k 7
Fig. 13
m
co
Fig. 14
9 9
2 8 9 9
8
8