JVC KS-F160 Service Manual page 7

QQ
3 7 63 1515 0
<Cassette mechanism assembly>
Prior to performing the following procedures, remove
the head amplifier board, the relay board and the
mechanism bracket.
Removing the direction switch board
1. Unsolder the three wires a on the direction switch
board.
2. Remove the one screw A
switch board.
Removing the FF / REW lever assembly
1. Remove the screw B attaching the FF / REW lever
assembly on the back of the cassette mechanism
assembly.
2. Remove the screw C on the upper side of the FF /
REW lever assembly.
3. Lift and pull forward the FF / REW lever assembly to
disengage the joints b, c, d and e.
TE
L 13942296513
Reattaching the FF / REW lever assembly
1. Reattach the FF / REW lever assembly to the joint c
on the back of the chassis.
2. Reattach the pinch-roller shaft e, the change lever d
and the return link e to the chassis.
www
.
http://www.xiaoyu163.com
(See Fig.1)
attaching the direction
(See Fig.1)
(See Fig.1)
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
C
FF / REW lever assembly
Joint e
Joint d
Q Q
3 6 7 1 3 1 5
co
.
9 4 2 8
Joint c
A
Joint b
B
Soldering a
Direction switch board
Fig.1
0 5 8 2 9 9 4 2 8
m
KS-F160
9 9
9 9
1-7