JVC KS-F160 Service Manual page 8

KS-F160
QQ
3 7 63 1515 0
Pinch-roller (R) assembly
Shaft
Remove the P arm spring (r)
from the chassis.
Removing the playback head (See Fig.2)
Prior to performing the following procedure, remove
the direction switch board and the FF / REW lever
assembly.
1. Remove the screw D attaching the playback head.
TE
L 13942296513
2. Remove the C washer and pull out the FF roller.
3. Remove the S support plate, the A arm spring (a)
and (b), the playback head.
The A arm spring (a) differs from the A
ATTENTION:
arm spring (b).
Removing the pinch-roller (R) and (F)
assembly (See Fig.2)
Prior to performing the following procedure, remove
the direction switch board and the FF / REW lever
assembly.
1. Remove the P arm spring (f) in the pinch-roller (F)
assembly from the chassis.
2. Remove the P arm spring (r) in the pinch-roller (R)
assembly from the chassis.
3. Draw out the pinch roller (F) and (R) assembly from
the shaft.
www
The P arm spring (f) differs from the P
ATTENTION:
arm spring (r).
The pinch roller (F) assembly differs
ATTENTION:
from the pinch roller (R) assembly.
1-8
http://www.xiaoyu163.com
S support plate
C washer
A arm spring (b)
FF roller
P arm spring (r)
x ao
y
. i
http://www.xiaoyu163.com
8
Pinch-roller (F) assembly
D
A arm spring (a)
Playback head
Remove the P arm spring (f)
from the chassis.
P arm spring (f)
Fig.2
Q Q
3 6 7 1 3
u163
.
2 9 9 4 2 8
Shaft
1 5 0 5 8 2 9 9 4
m
co
9 9
2 8 9 9