Note
After a certain time, play can develop within the adjustment mechanism of
■
the backrest angle.
For safety reasons, it is not possible to store the seat position in the electric
■
seat memory and remote control key memory if the inclination angle of the
seat backrest is more than 102° in relation to the seat cushion.
Each time you store the position of the electrically adjustable driver's seat
■
and exterior mirrors, the existing setting is deleted.
Manually adjusting the front seats
Fig. 65 Controls / setting
Read and observe
on page 79 first.
Adjusting a seat in a forward/back direction
›
Pull the lever
» Fig. 65
in the direction of the arrow 1 and push the seat in
A
the required direction.
The lock must click into place after you release the lever.
Adjusting height of seat
›
Again push/pull the lever
» Fig. 65
B
Adjusting the angle of the seat backrest
›
Relieve any pressure from the seat backrest (do not lean on it) and turn the
handwheel
» Fig. 65
in the direction of the arrow 3.
C
Adjusting lumbar support
›
Push the lever
» Fig. 65
in the direction of one of the arrows4.
D
80
Operation
in the direction of one of the arrows2.
Electric front seat adjustment
Fig. 66 Adjusting controls / lumbar support
Fig. 67 Setting: Seat pad / backrest
Read and observe
on page 79 first.
Adjusting a seat in a forward/back direction
›
Push the switch
» Fig. 66
in the direction of one of the arrows 3
B
Set the height of the seat cushion
›
Push the switch
» Fig. 66
in the direction of one of the arrows 5
B
Adjust the angle of the seat cushion
›
Push the switch
» Fig. 66
in the direction of one of the arrows 4
B
Adjusting the angle of the seat backrest
›
Push the switch
» Fig. 66
in the direction of one of the arrows 6
C
Reducing or increasing the curvature of the lumbar support
›
Push the switch
in the region of one of the arrows2
A
» Fig.
67.
» Fig.
67.
» Fig.
67.
» Fig.
67.
» Fig.
66.