Table of Contents
Advertisement
3. Remove the gobo springs with a small screwdriver.
4. Change the gobo and fix it with the gobo spring. Pay attention on a safe fit.
5. Close the
Attention:
If you use glass gobos, the non-vaporized side must be fitted towards the
lamp direction.
7
Maintenance and Cleaning the
7
It is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid
residues must not built up on or within the fixture. Otherwise the fixture's light-output will
be significantly reduced. Regular cleaning will not only ensure the maximum light-
output, but will also allow the fixture to function reliable throughout its life.
A soft lint-free cloth moistened with any good glass cleaning fluid is recom-
mended, under no circumstances should alcohol or solvents be used!
The inside optical system should be maintained only by authorized persons. Please
contact your local dealer.
7.1 Safety Regulations
• Pull out the main plug!
• Wait min. 20 minutes after the last operation to cool down the fixture.
• Before you put the
retina can be hurt!
GLP
German Light Production
Y
P
O
C
2
5
0 in reverse order.
Y
P
O
C
2
5
0
Y
P
O
C
2
5
Y
P
O
C
2
5
Y
P
O
C
2
5
0
Y
P
O
C
2
5
0
0 into operation close the casing, otherwise your
0
(V1.6)
24
Hide quick links:
Advertisement
Table of Contents
