Table of Contents
Advertisement
7.2 Circumference and Interval (rule-of-thumb)
The contamination of the fixture depends on the environment details. Therefore
no general guidelines can be given. From this it follows that the intervals are only
suggestions from our practice experience.
Position
Outside optic
Color filter
Gobos
Glass gobos
Prism
Dimmer/Shutter
Inside lens
Fan and air channel
Reflector
Lamp
Moveable parts
Attention:
1. Never let optical parts come into contact with oil or fat.
2. Before running the fixture wait until all parts are dried up.
3. Never clean the aspheric lens with water or other cleaners. Change the
lens if it looks milky (about 1-2 years). For that please contact your local
dealer.
7.3 Cleaning the Optical System
1. Pull out the main plug!
2. Wait min. 20 minutes after the last operation to cool down the fixture.
3. Open the upper shell of the head casing by loosening the 4 Phillips screws.
Two on the front side and 2 on the back side of the head.
4. Do the work as explained in the list above.
5. Before you put the
retina can be hurt!
GLP
German Light Production
Interval
weekly
monthly
yearly
monthly
monthly
yearly
monthly
monthly
never
never
yearly
Y
P
O
C
2
5
0 into operation close the casing, otherwise your
Y
P
O
C
2
5
0
(V1.6)
In this way
soft cloth and glass cleaning fluid
soft cloth and glass cleaning fluid
vacuum cleaner, airbrush, etc.
soft cloth and glass cleaning fluid
soft cloth and glass cleaning fluid
vacuum cleaner, airbrush, etc.
soft cloth no glass cleaning fluid
vacuum cleaner, airbrush, etc.
suitable fatty oil
25
Hide quick links:
Advertisement
Table of Contents
