Lamp Adjustment - GLP YPOC 250 Instruction Manual

Two on the front side and 2 on the back side of the head.
3. Open the 3 screws at the lamp sheet and remove it.
4. Remove the old or broken lamp out of the socket. Attention: The glass bulb of
the lamp can splinter. For that reason remove the lamp with safety gloves or
some cloth.
5. Put in the new lamp securely into the socket.
Attention: Use only the original lamp type!
6. Adjust the optimum distance between the lamp
bulb and the lens (1.0-1.5 mm) with the adjusting
screw [A]. This can be necessary through
different manufacturer.
7. Close the
8. The running time of the lamp
Time
in the
Attention:
Pay attention on a firm fit of the lamp and on the optimum distance

5.3 Lamp adjustment

The optimum distance between the lamp and the lens must be controlled after
every lamp change. The lower deviation amount is min. 1.0mm. Running the
fixture within a lower deviation can cause damages of lamp and/or lens.
The Y p o c 2 5
Y p o c 2 5
lamps, fine adjustments may improve light performance.
Pease follow this procedure:
GLP German Light Production
Y P O C 2 5 0 in reverse order.
Y P O C 2 5 0
Menu.
between the lamp and the lens (1.0 - 1.5 mm)!
min. distance 1mm
Screws "A"
Screws "B"
0 lamp holder is aligned at the factory. Due to differences between
0
LA1
can be reseed
WARNI NG:
Di sconne ct the fixtur e fr om AC p ower
before re-lamping.
Lamp is h ot! Risk of fire! Protect hands a nd eye s.
Wait at least 15mi n. Be for e openin g the covers
and removing l amp from the fi xture.
Maxi mum r oom temp erature t=45 C
Mi nimum distance from flammabl e materi al d=0 .5m.
Exte rior surface temper ature T=80 C
No t for domesti c use.
A
Be sure that th e lamp
bul b never tou ch the le ns
A B
Ad jus t l am p po s it io n b y tur nin g sc re w s a nd
B
(V1.6)
fastening screw
lamp
lamp
cover plate
22