Service; Cleaning; Installing A Glare Shield - GLP Fusion Stick FS16Z User Manual

Table of Contents

German Light Products®

Warning! There are no user-serviceable parts inside the fixture. Opening the

fixture can compromise its IP65 rating and cause damage that is not

covered by the product warranty. Any service operation that requires

removal of a cover must be performed by a professional service technician

with the tools, skills, and personal protective equipment to maintain high-

powered lighting equipment safely and efficiently.

11. Service

FS16Z fixtures require occasional cleaning to prevent the buildup of dust, dirt, and

residue from atmospheric effects. Failure to keep the fixture clean will significantly

reduce light output and may cause heat buildup and damage that is not covered by

the product warranty. Regular cleaning will ensure maximum performance and

reliable operation.

The cleaning schedule depends on the operating environment. Check fixtures

regularly for signs of dirt buildup.

You can clean the fixture using a soft cloth slightly dampened with a household or

automotive glass cleaning product. Do not apply pressure to the clear front or display

on the back of the fixture, as you may scratch these surfaces.

The FS16Z is supplied with a glare shield that can be installed on the front of the fixture

to reduce lateral light spill if required.

To install a Glare Shield:

See Figure 18. Slide the Glare Shield into the channel provided on the side of the

fixture where you want to prevent light spill.

Insert the two supplied grub screws into the threaded holes (arrowed) in the sides

of the fixture and tighten them until they grip the Glare Shield firmly.

Fusion Stick FS16Z User Manual Rev. A

Service

Figure 18. FS16Z Glare Shield

Table of Contents