Change The Lamp; Safety Regulations; Realize The Lamp Change - GLP YPOC 250 Instruction Manual

Channel Function
PAN
TILT
PAN / TILT
PAN / TILT (inverse)
Circle
Circle (inverse)
lying eight
random movement
Pan/Tilt relative movement
14) Speed
Pan/Tilt
Pan/Tilt slow – fast
Use this channel 14) also for the speed
of the movements (channel 13).
Laser OFF
15) Laser
Laser flashing random
Audio Laser
Blinking slow - fast
Flashing slow - fast
Laser ON
Shutter open
Lamp ON
Channel 12 ( min. 3 sec. ) (only if
Lamp OFF
shutter is closed, channel 9 = 0 ..15)
5

Change the Lamp

For a frictionless operation pleas read this chapter carefully and follow all instructions.

5.1 Safety Regulations

• Pull out the main plug!
• Wait min. 20 minutes after the last operation to cool down the fixture.
• Don't touch the bulb of the lamp with bare fingers (this can cause damages).
• Before you put the
retina can be hurt!

5.2 Realize the Lamp Change

1. Pull out the main plug!
2. Open the upper shell of the head casing by loosening the 4 Phillips screws.
GLP German Light Production
4 0°
4 90°
4 180°
4 270°
size / phase see also PAN
size / phase see also PAN
size / phase see also PAN
size / phase see also PAN
size / phase see also PAN
size / phase see also PAN
size see also PAN
Pan min. 530° = 200 s
Pan max. 530° = 2,65 s
Tilt min. 285° = 110 s
Tilt max. 285° = 1,8 s
Y P O C 2 5 0 into operation close the casing, otherwise your
Y P O C 2 5 0
(V1.6)
Time and Value
128..159
160..191 A0..BF
192..223 C0..DF
224..255 E0..FF
128..239
240..255 FO..FF
240..255 F0..FF
230..249
DMX HEX %
24..25 18..19 9,6
26..27 1A..1B 10,4
28..29 1C..1D 11,2
30..31 1E..1F 12
32..63 20..3F 13..25
64..95 40..5F 26..37
96..127 60..7F 38..50
80..9F 51..62
63..75
76..87
88..100
0..15 00..0F 0..6
16..255 10..FF 7..100
0..15 00..0F 0..6
16..31 10..1F 7..12
32..47 20..2F 13..18
48..127 30..7F 19..50
80..EF 51..93
94..100
94..100
6E..9F 92..97
21