Table of Contents
Advertisement
80°C are not critical. 80°C and more lead the lamp being switched off at a
critical point. Please note for a save operation that the outside temperature
should not exceed 45°C.
3.10.7 Fan Control
FANS
By using this function you can choose between 4 types of fan speed
operations. Use the Up/Down-keys to select desired function and press
Enter to confirm or Mode to cancel and return to the menu.
HIGH
REG
LOOF
LOHI
3.10.8 Adjustments and Calibrations
ADJU
By this function you can adjust and calibrate the positions of the different
wheels and other motors. This can be necessary after a service or repair
work.
For this function you have to entry the fixture code. This work should be
done only by authorized persons.
Use the Up/Down-keys to select desired function and press Enter to
confirm or Mode to cancel and return to the menu. Use now the Up/Down-
keys to set the adjustment values and confirm once more with the Enter-
key or cancel with the Mode-key.
Function
GLP
German Light Production
(FANS)
The cooling fan works continuously at max. speed.
The fan automatically raises its speed in order to control inside
temperature of the fixture.
The fan keeps the adjusted low speed until the temperature
exceeds max. inside temperature, then the
ally switch off the lamp.
The fan keeps the adjusted low speed until the temperature
exceeds max. inside temperature, then the
ally switch from low to high fan speed.
COLO
- 99 - + 99
GOBO
- 99 - + 99
PRIS
- 99 - + 99
SHT1
- 99 - + 99
SHT2
- 99 - + 99
clre
Adjustments in the internal circuit.
(ADJU)
Value
Remark
Color wheel
Gobo wheel
Prism wheel
Shutter 1
Shutter 2
(V1.6)
Y
p
o
c
2
5
0 automatic-
Y
p
o
c
2
5
0
Y
p
o
c
2
5
0 automatic-
Y
p
o
c
2
5
0
16
Hide quick links:
Advertisement
Table of Contents
