Configuration Files (Administrator Only) - Aastra 9143i Series Administrator's Manual

Configuration Files (
A system administrator can enter specific parameters in the configuration files to
configure the IP phones. All parameters in configuration files can only be set by
an administrator.
You can enter specific configuration parameters in either of the following
configuration files:
• aastra.cfg
• <mac>.cfg
References
For information about configuration file precedence, see
For a description of each configuration file parameter, see
"Configuration Parameters."
Using the Configuration Files
When you use the configuration files to configure the IP phones, you must use a
text-based editing application to open the configuration file (aastra.cfg or
<mac>.cfg).
Use the following procedure to add, delete, or change parameters and their
settings in the configuration files.
41-001160-03 Rev 00, Release 2.5
Administrator Only
Note: Apply this procedure wherever this Administrator Guide refers to
configuring parameters using the configuration files.
Configuration Interface Methods
)
Configuration Methods
Chapter 1, "Overview."
Appendix A,
2-17