Aastra 9143i Series Administrator's Manual page 987

Parameter –
audio mode
Description
Format
Default Value
Range
Example
41-001160-03 Rev 00, Release 2.5
Operational, Basic, and Advanced Parameters
IP Phone UI
Configuration Files
Allows you to configure how the "handsfree" key on the IP phone operates.
Integer
0
0 Speaker - Calls can be made or received using the handset or
handsfree speakerphone and can be switched between the two
modes by pressing the d /fkey. When on speaker, you can return to
using the handset by placing the handset on the cradle and
picking it up again.
1 Headset - Calls can be made or received using the headset. Calls
can be switched between the headset and handset by pressing the d
/fkey.
2 Speaker/headset - Incoming calls are sent to the speakerphone. By
pressing the d /f key, you can switch between the handsfree
speakerphone, the headset, and the handset.
3 Headset/speaker - Incoming calls are sent to the headset. By
pressing the d /fkey, you can switch between the headset, the
handsfree speakerphone, and the handset.
audio mode: 2
Options->Set Audio
aastra.cfg, <mac>.cfg
A-207