Jack Plug 3.5 Mm (In, Out, Mic); D- Sub, 25 Pin (Lpt1, Modular Printer); D- Sub, 15 Pin (Vga); Lan (Rj45) - Wincor Nixdorf BEETLE /S-II plus User Manual

Jack Plug 3.5 mm (IN, OUT, MIC)

Physically the microphone (MIC) and IN and OUT jacks are identical as all
require 3.5 mm phone jack for data transfer. However, both differ
concerning the pin assignment so that a faultless transmission is only
ensured with the designated connection.
Besides a microphone a headset can be used alternatively via this interface.

D- Sub, 25 pin (LPT1, Modular Printer)

The standard parallel interface LPT1 is intended for connecting a printer.

D- Sub, 15 pin (VGA)

You can connect a monitor to the BEETLE /S-II plus via the 15-pin D-sub
jack on the CRT adapter.

LAN (RJ45)

The system can be connected to a network (LAN) from the POS terminal
back panel.
LEDs
right LED
left LED
Only con nect shiel ded LAN ca bles (CAT5/CAT5e) as the se
of fer a bet ter pro tec ti on in case of in ter fer en ces in a net work.
22
constantly yellow
flashes yellow
off
green
Connected to network
Data transfer
10mBit/s
100mBit/s
BEETLE /S-II plus