Setup Menu; Audio Setup - Kenwood DNX7220 Instruction Manual

Setup Menu

You can setup various receiver parameters.
Setup Menu
Displays the Setup menu to set various functions.
1 Display the control screen of any source
Touch any source button on the "Source Select"
screen.
2 Display the SETUP Menu
3 Select the setup item
1
2
2
1 The selected setup screen appears.
2 Scrolls the setup menu.
⁄
• [Audio SETUP] and [AV Interface] options can be locked.
The key mark is displayed in reverse video for the locked
option. See <Setup Memory> (page 79).
60 DNX7220

Audio Setup

You can setup a speaker network, etc.
1 Display the Audio SETUP screen
Touch
Menu" screen (page 60).
⁄
• [Audio SETUP] cannot be selected under the following
conditions:
– When no source is selected.
– When dual zone function is set to on. See <Zone
Control> (page 84)
2 Setup each item
1
1 Selects the speaker to set the crossover. See
<Crossover Network Setup> (page 61).
2 Sets the availability of subwoofers. See
<System Setup> (page 64).
3 Selects the type of front speakers.
"Standard": Setup for general diameter
speakers
"Narrow": Setup for small diameter
speakers
"Middle": Setup for middle diameter
speakers
"Wide": Setup for large diameter
speakers
4 Switches to the crossover setup screen.
See <Crossover Network Setup> (page 61).
5 Returns to the "SETUP Menu" screen.
in the "SETUP
2
3
4
5