Key Word Voice Registration - Kenwood DNX7220 Instruction Manual

Key Word Voice Registration

Registers the voice to select the Phone number
category by Voice Recognition.
1 Display the Key Word List screen
Display the "Hands Free" screen and touch
[Setup]. See <Control Screen Function> (page
49).
2 Select the Phone number category to
register
1
1 Selects the Phone number category. "REC"
turns on for data with voice for voice
recognition already registered.
2 Registers voice for the selected Phone
number category.
3 Plays voice registered for the selected
Phone number category.
4 Deletes voice registered for the selected
Phone number category. Touch to display
the confirmation screen. Touch [YES] to
delete or [NO] to cancel.
5 Returns to the Hands Free Set Up screen.
3 Display voice registration screen
4 Utter the voice to register (1st try)
6 Registers the voice.
7 Cancels voice registration.
Utter within 2 seconds after the Beep.
5 Utter the voice to register (2nd try)
2
6 End voice registration
3
4
5
⁄
• A message is displayed if the voice is not recognized.
Read the message for the further operation.
• Repeat from 1st try if the voice is different from the 1st
try.
7
6
English 57