Basic Operations - Kenwood DNX7220 Instruction Manual

Basic Operations

C
Turns power ON/OFF
Press the button to turn on the power.
When the button is pressed and held down for
1 second or more, the power is turned off.
D
Adjusts the volume
Playing a USB device
When connecting a USB device, playback starts automatically.
You must update the database if you are using a USB device that is different from the one you used
before or if you have replaced the audio files in the USB device. For information on how to update the
database, refer to <Function while displaying the Control Screen> in USB Device Control (page 36).
Removing the USB device
Press on the USB control screen to enter the USB suspend mode, and then remove the USB
device. Refer to <USB Device Control> (page 36).
¤
• Removing the USB device before entering the USB suspend mode may result in damaging the data in the USB device.
10 DNX7220
E D
⁄
• If the USB source is selected when a USB device is not connected, "No Device" is
displayed.
• When the playback is stopped and then restarted, the playback will start from
the point where it was stopped at the last time. Even if the USB is removed and
connected again, the playback will start from the last stopped point unless the
contents in the USB device is changed.
• Make sure that the USB device is connected firmly.
C B A
B
Switches to the Navigation system
Press the button to switch the display to the
navigation system screen.
E
Attenuates the volume
Press it to attenuate the volume.
Press it again to cancel muting.