Voice Registration - Kenwood DNX7220 Instruction Manual

Hands Free Unit Control

Voice Registration

Registers voice for voice recognition in
Phonebook. Up to 35 voices can be recorded in
one cell-phone.
1 Select the name to register
Go through the procedure of <Calling by
Phonebook> (page 52).
1
1 Selects a name.
"REC" turns on for data with voice for voice
recognition already registered.
2 Display the voice registration screen
3 Utter the voice to register (1st try)
2 Registers the voice.
3 Cancels voice registration.
Utter within 2 seconds after the Beep.
4 Utter the voice to register (2nd try)
56 DNX7220
3
2
5 End voice registration
⁄
• A message is displayed if the voice is not recognized.
Read the message for the further operation.
• Repeat from 1st try if the voice is different from the 1st
try.