Compak K3 TOUCH Instruction Manual page 18

10.2. bean hopper cleaning
In order to properly clean the bean hopper (
and fragments.
To remove the hopper, first close the bean trap (
screw ( ) and lift the hopper straight up.
Clean the hopper (
soap to eliminate any oily residue from the beans.
Replace the bean hopper (
in reverse.
10.3. Cleaning the grind chamber
It is recommended that the grind chamber be cleaned monthly with a cleaner as
recommended by Compak. This process will eliminate smelly residues from the
coffee remains, which can negatively affect the quality of the brewed coffee.
The steps to follow are:
In order to properly clean the bean hopper (
and fragments.
• Close the bean trap on the hopper (
grind chamber.
• Remove any remaining coffee beans from the bean hopper (
• Pour the recommended grinder cleaning product into the bean hopper (
open the bean trap (
chamber.
• Grind the cleaning product at a medium course grind setting until the recommended
amount is passed through the system and nothing remains in the grind chamber.
• Clean the hopper (
• Discard the first 2-3 doses of coffee to assure that the residual cleaning product
is removed from the grind chamber and set the grind regulator to the desired
setting ( ).
Following these steps will ensure that the grinder is clean and ready for use.
We do not recommend the taking apart of the grind assembly unless changing burrs,
or removing a blockage/obstruction in the grind chamber. Removal of the grind
assembly should be performed by a qualified service technician.
K01070 | v. 25/03/2014 | Ref. quality process 002/03 | ORIGINAL INSTRUCTIONS
) with a moist soft cloth or with a small amount of water and
) following the same steps as the removal process, but
), allowing the cleaning product to pass into the grind
) and refill with coffee beans.
), first empty out all remaining beans
), and then loosen the hopper lock
), first empty out all remaining beans
) and grind out the remaining coffee in the
).
) and
15