Dryer Use - Whirlpool LEW0050PQ Job Aid And Service Manual

STARTING THE DRYER
WARNING
Explosion Hazard
Keep flammable materials and vapors,
such as gasoline, away from dryer.
Do not dry anything that has ever had
anything flammable on it (even after
washing).
Failure to follow these instructions can
result in death, explosion, or fire.
Before using your dryer, wipe the dryer drum
with a damp cloth to remove dust from storing
and shipping.
IMPORTANT: Do not use fabric softener sheets
in this dryer.
1. Clean the lint screen before or after each
cycle.
2. Load clothes loosely into the dryer and
close the door. Do not pack the dryer. Allow
space for clothes to tumble freely.
3. Press the POWER button to turn the dryer
on. The indicator light will glow to indicate
that the power is on.

DRYER USE

4. Press the TEMPERATURE button to select
the recommended temperature setting for
the type of load being dried.
5. Turn the cycle knob to the recommended
setting for the type of load being dried.
6. After a short beep sounds, press the START
button.
STOPPING & RESTARTING
To stop your dryer at any time, turn the cycle
knob to the STOP position, or open the door.
To restart the dryer:
1. Close the door.
2. Select a new cycle and temperature (if
desired).
3. After the beep sounds, press the START
button.
CHANGING CYCLES
AND TEMPERATURES
To change the cycle or temperature after
pressing Start:
1. Open the dryer door.
2. Press the TEMPERATURE button to
change the temperature (if desired).
3. Turn the cycle knob to the new desired
position.
4. After the beep sounds, press the START
button.
3-3