Ring Group - ATCOM IP-04 User Manual

www.atcom.cn
7.

Ring Group

In a ring group, you can have calls ring multiple user extensions at one time. The first user to
pick up the call gets the call and all other phone stop ringing.
First, we need to set up a ring group specify what extensions need to ring when the call enter
this group.
Ring Groups-->Ring Groups
We have set a group Sales_team in above. This group include the extension 100 and 101
Then we need to "link" the group with the incoming calls.
Incoming calls --> Incoming calls
Above we set that all the incoming call from port1 will enter the ring group Sales_team. So if
there is any call from port1. the extension 100 and 101 will rings at the same time.
File Edit- MMC card NTP server
22/35