Table of Contents
Advertisement
ADVANCED CONFIGURATION
EN
HDD: General
The HDD: General menu allows you to initialize the hard
drive(s) in the DVR. Don't initialize a drive that already has
data on it, as the initialization process erases any information
on the drive.
HDD: Advanced/HDD Detect
The HDD: Advanced menu allows you to configure a quota
on the HDD for each camera that is connected to the DVR.
Each camera can be allocated a certain amount of space
that is available on the HDD.
38
Init: Initializes the HDD so that it's ready to accept data.
The HDD: Detect menu will display technical specifications
of the hard drive installed. If you're looking at this screen,
you've probably been directed to do so by Swann Technical
Support.
Advertisement
Table of Contents
