Pump & Pipe; Installation Instructions; Direct Discharge To Outside - Glentronics PHCC-1000 Pro Series Instruction Manual & Safety Warnings

Battery backup sump pump system
Hide thumbs Also See for PHCC-1000 Pro Series:
Table of Contents

Advertisement

Pump & Pipe

Installation Instructions

There are two basic methods that can be used to
install the pump, a direct discharge to the
outside of the building, or a connection to an
existing discharge pipe. The same two options
apply in very narrow sump pits where the backup
pump must be mounted above the main pump.
Whenever possible, install your Pro Series backup
pump with a direct discharge to the outdoors.
By using this method, there will always be an
outlet for the water from the sump. During times
of very heavy rain, many storm sewers fill up. If
your pump is trying to discharge water into a full
sewer, there is nowhere for the water to go. By
discharging directly outdoors, there is always an
outlet for the water that is pumped out of the
sump. For this method, you will need to drill a
hole through a floor joist or the foundation from
the basement to the outside of the house.
If the direct discharge method is not possible or
convenient, the Pro Series pump can be
connected to the same line as your main AC
sump pump by installing a "Y" connector and
two (2) check valves.
In most cases, the backup pump will fit next to
the main AC pump in the sump pit. In very
narrow pits, the backup pump can be mounted
above the main AC pump. Try to fit the backup
pump on the floor of the sump first. Make sure
there is enough room so the backup pump and
the main pump do not touch each other.
Select the installation method that will best suit
your needs from the diagrams at the right. Full
instructions for each installation method are
provided on the following pages.
Installation will take a couple hours.
Page 3
NORMAL SUMP PIT
INSTALLATIONS
FLOOR
JOIST
RIGID
1-1/2"
PVC PIPE
UNION
OR CHECK
VALVE
DRILL 1/8" HOLE
IF CHECK
VALVE USED
Installation A
PIPE ADAPTER
Direct Discharge
to Outside
PRO SERIES
PUMP
Page 4
NARROW SUMP PIT
INSTALLATIONS
FLOOR
JOIST
RIGID
1-1/2"
PVC PIPE
UNION
OR CHECK
VALVE
PUMP WIRE
DRILL 1/8" HOLE
IF CHECK
VALVE USED
Installation C
PIPE ADAPTER
Direct Discharge
PRO SERIES
PUMP
to Outside
Page 6
"L" BRACKET
FLOOR
JOIST
SLOPE
PIPE
DOWN
45º ELBOW
CHECK
CHECK
VALVE
VALVE
PUMP
DRAIN TILE
1/8" HOLE
WIRE
PIPE
ADAPTER
MAIN
PRO SERIES
AC PUMP
PUMP
FLOOR
JOIST
SLOPE
PIPE
DOWN
RIGID
1-1/2"
PVC PIPE
45º ELBOW
CHECK
CHECK
VALVE
VALVE
PUMP WIRE
1/8" HOLE
DRAIN TILE
PIPE ADAPTER
HOSE
PRO SERIES
CLAMPS
PUMP
MAIN
"L" BRACKET
AC PUMP
RIGID
1-1/2"
PVC PIPE
"Y" CONNECTOR
CHECK
VALVE
PUMP
WIRE
DRAIN TILE
Installation B
Connection
to Existing
MAIN
Discharge Pipe
AC PUMP
Page 5
RIGID
1-1/2"
PVC PIPE
"Y"
CONNECTOR
CHECK
VALVE
DRAIN TILE
Installation D
Connection
HOSE CLAMPS
to Existing
MAIN
Discharge Pipe
AC PUMP
Page 7

Advertisement

Table of Contents
loading

Table of Contents