Limited Warranty - Glentronics PHCC-1000 Pro Series Instruction Manual & Safety Warnings

Limited Warranty

GLENTRONICS, INC. warrants to the original retail purchaser that all of its pump, switch, sensor, battery
box and control unit products are free from defective materials and workmanship for the period
indicated below:
All parts and labor (excluding installation) for a period of
three (3) years from the date of purchase
The defective product must be returned directly to the factory, postage prepaid with the original bill
of sale or receipt to the address listed below. Glentronics, Inc., at its option, will either repair or
replace the product and return it postage prepaid.
The unit must be shipped freight prepaid, or delivered, to Glentronics, Inc. to provide the services
described hereunder in either its original carton and inserts, or a similar package affording an equal
degree of protection.
The unit must not have been previously altered, repaired or serviced by anyone other than Glentronics,
Inc., or its agent; the serial number on the unit must not have been altered or removed; the unit must
not have been subject to accident, misuse, abuse or operated contrary to the instructions contained
in the accompanying manual.
The dealer's dated bill of sale, or retailer's receipt, must be retained as evidence of the date of purchase
and to establish warranty eligibility.
This warranty does not cover product problems resulting from handling liquids hotter than 120 degrees
Fahrenheit, handling inflammable liquids, solvents, strong chemicals or severe abrasive solutions;
normal wear; user abuse; misuse, neglect, improper maintenance, commercial or industrial use;
improper connections or installation; damages caused by lightning strikes, excessive surges in AC line
voltage, water damage to the controller, other acts of nature, or failure to operate in accordance with
the enclosed written instructions.
GLENTRONICS, INC. WILL NOT BE LIABLE FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTIES ON THIS PRODUCT. SOME STATES DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF CONSEQUENTIAL OR INDIRECT DAMAGES, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. THIS EXPRESS WARRANTY SHALL BE EXCLUSIVE AND IS IN LIEU OF ALL OTHER
WARRANTIES, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE CUSTOMER'S EXCLUSIVE
REMEDY FOR BREACH OF THIS WARRANTY, OR OF ANY IMPLIED WARRANTY NOT EXCLUDED HEREIN, SHALL
BE LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT.
For information or service contact:
Glentronics, Inc.
645 Heathrow Drive
Lincolnshire, IL 60069-4205
800-991-0466
Model # PHCC-1000 Serial # _____________________ Purchase Date__________________
Register online at www.stopflooding.com
Page 15
CONDITIONS
CHECK OUT THESE OTHER PHCC PRO SERIES PRODUCTS
AC PUMPS
Industrial Grade Pumps for the Residential Market
The Pro Series line of AC sump pumps and sewage pumps
are strong, dependable, and so energy efficient they
could pay for themselves in a few years. The sump
pumps are equipped with dual float switches for added
reliability, and a controller that will sound an alarm if
there is an AC power loss or a pump problem. The
control unit has a terminal which can be connected to
your security system or an auto dialer to forward the
signal to you or your alarm company. When your main
AC pump needs replacement, consider upgrading to one
of the pumps in the PHCC Pro Series line.
FLOAT SWITCHES
What's the most common reason your main AC pump
fails?
It's probably the result of a float switch that is stuck or
broken. Replace it with a PHCC Pro Series dual float and
controller for reliable operation. The dual float has, not
one, but two floats mounted within a protective cage.
Should one float fail to operate, the second float
automatically activates the pump. The protective cage
prevents debris or other wires from interfering with the
movement of the float. It can be used to replace the
float on most AC pumps.
CHECK VALVES
What's a Klunkless Check Valve™?
If you've spent any time in your basement, you've
probably noticed your sump pump turning on and off
with a loud clunk. That's the result of the water
pressure slamming the valve closed in the check valve.
The Klunkless Check Valve has a built-in air chamber to
counteract that pressure and muffle the sound. It works
just like a conventional check valve, only quieter.
WATER ALARMS
Minimize the risk of water damage
You can detect leaks before they become bigger
problems by placing a water alarm wherever there is a
risk of water damage...in the utility room, laundry
room, kitchen, bathroom or basement. The alarm will
sound when as little as 1/32" of water reaches the
sensor.
© 2008, Glentronics, Inc.
S3033
DFC2
CCV1
PWA
1806048 (07/11)