Chapter 11: System Board Jumper - PIONEERPOS Stealth-M1 User Manual

Chapter 11: System Board Jumper

(Highlighted item indicates factory default setting)
WARNING:
This section is written for TECHNICALLY QUALIFIED PERSONNEL ONLY. Modifying jumper setting to other than
manufacturer default setting may result in damages of device. PioneerPOS will not be responsible for loss and
damages on StealthTouch terminal and any other devices due to user modification. Call 909-468-9757 or email
support@pioneerpos.com
JP1: LVDS LCD Power Select
JP1 LVDS Power
1-2 3.3V (default)
2-3 5V
JP4: LED and CCFL Inverter Select
JP4 LVDS Power
1-2 CCFL Inverter
2-3 LED Inverter (default)
JCMOS1: Clear CMOS
JCMOS1 Clear CMOS
1-2 Normal (Default)
2-3 Clear CMOS
[End of document]
Manual for Stealth M1 v1.0
for help.
Page 28
Settings