Table of Contents
Advertisement
When handling CPU, memory, or hard drive, do not touch the connection surface. Hold the component by its edge and do
not hold the contact part.
Chapter 8: Stealth-M1 System Problems
8.1
No power
Problem description: System could not turn on (no POST screen, System Power Indicator LED is off, no sound from Fan
or Hard Drive).
For terminal with built-in printer, See link below for step-by-step guide to access the power supply adapter.
https://www.youtube.com/watch?v=NJTPLDbnzJw
1.
Make sure that the power cord coming out from the system is plugged in to the power source (electrical outlet). By
pass power strips or power extension or UPS (Uninterrupted Power Supply) to verify that the system turns on.
Verify that the electrical outlet is working by connecting it to equipment such as a radio.
2.
Check if the LED light on Power Supply Unit is on. If it is not on, double check the connection of power chord to
the Power Supply Unit.
Power
Supply Unit
LED Light
3.
Make sure that the power cord is plugged in to the power supply block completely.
4.
Check if you have the right power adapter. Power adapter part number is STLH-PSFSP1501.
5.
Make sure that the power connector is plugged in to the power port on I/O panel. Unplug and re-connect the
power connector as required.
A defective hard drive my cause the system to not able to boot. Please refer to "Hard Drive Issue"
5.
Manual for Stealth M1 v1.0
Page 20
Advertisement
Table of Contents
