Chapter 4: Network - PIONEERPOS Stealth-M1 User Manual

Chapter 4: Network

4.1 Wired network
Standard Stealth-M1 comes with on-board Intel Network controller. For regular network usage, you just need to plug in the
network cable and it should work. In case you need to check your network setting, you can follow the instruction below:
1. Start -> Control Panel -> System
Under "Hardware Tab", select "Device Manager"
2.
Expand "Network adapters" selection.
3.
In "Intel 82574L Gigabit Network Connection Properties", you can check items such as: MAC Address, IP Address,
4.
Link Status.
To perform Network Test and Diagnostic under the table "Link Speed". Then, click on "Diagnostics".
5.
Manual for Stealth M1 v1.0 Page 13