Table of Contents
Advertisement
Chapter 2: Setting up PioneerPOS system
2.1
Connecting power
If your system comes with a base, you just need to locate the power cord and plug it to a surge protector or uninterruptible
power supply (UPS) Unit.
[Caution] Do not plug in the unit directly into a wall outlet. Lightning or power surge may damage the system. Always
connect the power through a surge protector or uninterruptible power supply (UPS) unit.
2.2
Connecting cables to I/O panel
1.
Tilt the terminal.
2.
Slide to remove the vertical cover
3.
Route cables of peripherals through the base.
4.
Route cables of peripherals to the front.
Manual for Stealth M1 v1.0
Page 9
Advertisement
Table of Contents
