Aastra 6730i Installation Manual page 14

5. Push the clip in until it snaps into the slot flush with the surface and only the legs on the clip are sticking up.
6. Place the handset into the phone's cradle, inserting the legs on the clip into the square hole on the handset. This
allows the handset to rest in the cradle in a vertical position without slipping off when the phone is installed on the wall.
Clip
41-001277-06 Rev 01 – 03.2012
Remove clip, turn 180
degrees, and reinsert
clip.
Square Hole
on Handset
Installation and Setup
10