Desk Or Wall Installation - Aastra 6730i Installation Manual

Desk or Wall Installation

Install on the Desk
The desk installation for the 6730i IP Phone IP phone consists of two legs that attach to the back of the phone near the top
corners. A total of four different viewing angles allows users to personalize their phone viewing preference.
1. Attach each leg by inserting the tabs on the leg into the slots on the bottom of the phone. There are three pair of
leg slots on each corner of the phone; each leg uses two pairs (1&2, or 2&3) giving two leg positions designating
different viewing angles. Furthermore, the legs can be reversed which offer two additional viewing angles.
2. For a higher viewing angle, use the second and third slots from the top.
3. For a lower viewing angle, use the first and second slots from the top.
4. Push the stand towards the phone until it snaps into place.
20.7 deg.
Incline Angle
41-001277-06 Rev 01 – 03.2012
Three leg slot locations
for customizing the height
of the desk phone.
23.3 deg.
26.6 deg.
Incline Angle
Incline Angle
Four Different Viewing Angles
Installation and Setup
30.9 deg.
Incline Angle
8