Network > General Settings 69 - Vivotek FD8138-H User Manual

VIVOTEK
Network > General settings
This section explains how to configure a wired network connection for the Network
Camera
Network Type
LAN
Select this option when the Network Camera is deployed on a local area network (LAN) and is
intended to be accessed by local computers The default setting for the Network Type is LAN
Rememer to click Save when you complete the Network setting
Get IP address automatically: Select this option to obtain an available dynamic IP address assigned
by the DHCP server each time the camera is connected to the LAN
Use fixed IP address: Select this option to manually assign a static IP address to the Network
Camera
1 You can make use of VIVOTEK Installation Wizard 2 on the software CD to easily set up the
Network
Camera on LAN Please refer to Software Installation on page 23 for details
2 Enter the Static IP, Subnet mask, Default router, and Primary DNS provided by your ISP
Subnet mask: This is used to determine if the destination is in the same subnet. The default value
is "2552552550"
Default router: This is the gateway used to forward frames to destinations in a different subnet.
Invalid router setting will fail the transmission to destinations in different subnet
User's Manual - 69