Vivotek FD8138-H User Manual page 223

forcechk N/A
minsft <positive
integer>
Return Code
400 Bad Request
415 Unsupported Media Type
8.18 Open Anystream
Note: This request requires Viewer access privileges.
Syntax:
For HTTP push server (MJPEG):
http://<servername>/videoany.mjpg?codectype=mjpeg[&resolution=<value>&mjpeg_quant=<value>
&mjpeg_qvalue=<value>&mjpeg_maxframe=<value>]
For RTSP (MPEG4), the user needs to input the URL below into an RTSP compatible player.
rtsp://<servername>/liveany.sdp?codectype=mpeg4[&resolution=<value>&mpeg4_intraperiod=<valu
e>&mpeg4_ratecontrolmode=<value>&mpeg4_quant=<value>&mpeg4_qvalue=<value>&mpeg4_bit
rate=<value>&mpeg4_maxframe=<value>]
For RTSP (H264), the user needs to input the URL below into an RTSP compatible player.
rtsp://<servername>/liveany.sdp?codectype=h264[&resolution=<value>&h264_intraperiod=<value>&
h264_ratecontrolmode=<value>& h264_quant=<value>& h264_qvalue=<value>&
h264_bitrate=<value>& h264_maxframe=<value>]
<product dependent>
PARAMETER
codectype
solution
request. Ex: Request the streaming from 12:20
rtsp://10.0.0.1/live.sdp?maxsft=10&reftime=12:30
N/A Check if the requested stream enables timeshift, feature
and if minsft is achievable.
If false, return "415 Unsupported Media Type".
0 How many seconds of cached stream client can accept
at least.
(Used by forcechk)
Description
Request is rejected because some parameter values are illegal.
Returned, if forcechk appears, when minsft is not achievable or the
timeshift feature of the target stream is not enabled.
VALUE
mjpeg, mpeg4, h264
<product dependent>
capability_videoin_resolution
URL Commands for FD8138-H
URL Command Document for All Series
DEFAULT DESCRIPTION
N/A Set codec type for Anystream.
<product Video resolution in pixels.
dependent>
92
VIVOTEK
User's Manual - 223