Vivotek FD8138-H User Manual page 314

Fixed dome network camera
Hide thumbs Also See for FD8138-H:
Table of Contents

Advertisement

VIVOTEK
8.16 Virtual input
Note: Change virtual input (manual trigger) status.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/setvi.cgi?vi0=<value>[&vi1=<value>][&vi2=<value>]
[&return=<return page>]
PARAMETER
VALUE
vi<num>
state[(duration)nstate]
Where "state" is 0, 1. "0"
Where "nstate" is next
return
<return page>
Return Code
Description
200
The request is successfully executed.
400
The request cannot be assigned, ex. incorrect parameters.
Examples:
1. setvi.cgi?vi0=0(10000)1(15000)0(20000)1
2. setvi.cgi?vi3=0
3. setvi.cgi?vi=1
314 - User's Manual
means inactive or
normal state while "1"
means active or
triggered state.
state after duration.
No multiple duration.
VI index is out of range.
No VI index is specified.
URL commands for FD8338-HV
URL Command Document for All Series338-H
DESCRIPTION
Ex: vi0=1
Setting virtual input 0 to trigger state
Ex: vi0=0(200)1
Setting virtual input 0 to normal state, waiting 200
milliseconds, setting it to trigger state.
Note that when the virtual input is waiting for next
state, it cannot accept new requests.
Redirect to the page <return page> after the request
is completely assigned. The <return page> can be
a full URL path or relative path according the
current path. If you omit this parameter, it will
redirect to an empty page.
90

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fd8338-hv

Table of Contents