Table of Contents
Advertisement
VIVOTEK
Patrol settings
You can select some preset positions for the Network Camera to patrol
Please follow the steps below to set up a patrol schedule:
1 Select the preset locations on the list, and click
2 The selected preset locations will be displayed on the Patrol locations list
3 Set the Dwelling time for the preset location during an auto patrol
4 If you want to delete a preset location from the Patrol locations list, select it and click Remove
5 Select a location and click
to rearrange the patrol order
6 Select patrol locations you want to save in the list and click Save to enable the patrol settings
7 To implement the patrol schedule, please go to homepage and click on the Patrol button Please refer
to the next page
x1.8
2
3
1
4
5
6
100 - User's Manual
Advertisement
Table of Contents
