Safety Instructions - Nilfisk-ALTO Neptune 4 Series Supplement To Service Manual

Nilfisk
ALTO
For your own safety
ESD (electrostatic
discharge)
Neptune 4_EN_Ver.1.0_04/06

Safety instructions

Repairs should only be
made by someone who
h a s r e c e i v e d p r o p e r
instructions for the job or
w h o i s a q u a l i f i e d
electrician.
Observe the following ESD precautions before any repair of or near
electronic parts:
l
Touch the protective conductor to discharge your own body.
l
Possibly wear an anti-static wrist strap.
l
Use a conducting floor or tabletop.
l
Never touch a circuit board or electronic components always hold
it by the plastic or insulation.
l
Transport electronic parts in conductive packaging (e.g. special
ESD packages).
Safety instructions
Observe national safety directives and
regulations for the electrical engineering
trade, in particular:
IEC 60335-2-69
EN 60335-2-69
Before starting the equipment, be sure to
read the accompanying operator manual,
and keep it close as ready reference.
The equipment should only be used by
persons who have been instructed in its
use and are authorized to do so.
A
2/21