Adjustments - Nilfisk-ALTO Neptune 4 Series Supplement To Service Manual

Nilfisk
ALTO
1. Control board
For adjustment refer to the Neptune 3 Service Manual (chapter G.1).
2. Control Safety Block
The adjustment procedure is described in the Neptune 3 Service Manual (chapter G.2) or STI MPW-
030.
3. Heat exchanger system
The adjustment procedure is described in the Neptune 3 Service Manual (chapter G.3) or STI MPW-005
/ STI MPW-028.
NEPTUNE
CO content
2
Fuel pressure
Soot rating
Table G.1: Heat exchanger settings
4. Flow control
The adjustment procedure is described in the Neptune 3 Service Manual (chapter G.3).
5. Automatic AntiStone
The parameters for adjustment are described in the Neptune 3 Service Manual (chapter G.4).
6. Electrical connection
The adjustment of the star / delta switch is described in the Neptune 3 Service Manual (chapter G.5).
Neptune 4_EN_Ver1.0_04/06

Adjustments

4
% 10.5 (+ 0.5)
bar 15 (- 0.5)
0-1
G
Adjustments
12/21