Time Zone - Mercedes-Benz COMAND Operating Instructions Manual

i
The following navigation system functions
require the time, time zone and summer/
standard time to be set correctly in order to
work properly:
route guidance on routes with time-
R
dependent traffic guidance
calculation of expected time of arrival
R
i
With this function, you can set the time for
every display in the vehicle.
Setting the time/date format
Press the W button.
X
Select Time Time by turning c V d the COMAND
X
controller and press W to confirm.
Select Format Format and press W to confirm.
X
The # symbols show the current settings.
Set the format by turning c V d the
X
COMAND controller and press W to con-
firm.
Abbreviation Meaning
DD DD . MM MM . YY YY Day . Month . Year
(date format, two digits)
MM MM / DD DD / YYYY YYYY Month/Day/Year
date format, year (all
four digits)
YY YY / MM MM / DD DD Year/Month/Day
date format, year (two
digits)
HH HH : MM MM Hours : Minutes
(24 hrs) (24 hrs)
(24 hour time format)
HH HH : MM MM (AM/PM) (AM/PM) Hours : Minutes
(AM/PM time format)
Adjusting the time zone and switching
to Daylight Savings Time (Summer)
Press W.
X
Select Time Time by turning c V d the COMAND
X
controller and press W to confirm.
Select Time

Time Zone

Zone and press W to confirm.
X
A list of countries or time zones appears.
The # dot indicates the current setting.
Select the country or time zone by turning
X
cVd the COMAND controller and press W
to confirm.
A time zone list may also be displayed,
depending on the country selected.
Select the time zone and press W to con-
X
firm.
The entry for the Automatic Time Set‐ Automatic Time Set‐
tings tings is accepted.
Subsequent operation depends on whether
the automatic changeover function to sum-
mer time is available.
To change manually: select
X
press W to confirm.
To change to automatic time: select
X
Automatic Automatic and press W to confirm.
The entry for the Automatic Time Set‐ Automatic Time Set‐
tings tings is accepted.
To switch the automatic time setting
X
off/on: press the W button.
Select Time Time by turning c V d the COMAND
X
controller and press W to confirm.
Press W to confirm the
X
Settings. Settings
Switch the automatic time setting off ª or
on again O.
To switch on: the menu item is switched
on as the default setting. If the
Time Settings Time Settings is switched off and you
switch it on again, the last settings for the
time zone and summer time changeover
are selected.
To switch off: the time zone is deselected
and the summer time is switched off. If
Automatic Automatic is set for the summer time
changeover, a prompt will appear asking
whether this should be maintained.
Select Yes Yes or No No and press W to confirm.
X
Time settings
ON ON or OFF OFF and
Automatic Time Automatic Time
Automatic Automatic
43