Rear View Camera - Mercedes-Benz COMAND Operating Instructions Manual

Turn cVd or slide ZVÆ the COMAND con-
X
troller and press W to confirm.
The massage function runs for approx-
imately 15 to 25 minutes, depending on the
setting.
To exit the menu: press the k back
X
button.
Adjusting the driving dynamics
This function is available on vehicle model
series with a dynamic multicontour seat.
Select the seat ( page 52).
X
Y
Select Dynamic Seat Dynamic Seat
X
COMAND controller and press W to con-
firm.
A scale appears.
You can select:
0 0 : Off
R
1 1 : level 1 (medium setting)
R
2 2 : level 2 (high setting)
R
Turn cVd or slide ZVÆ the COMAND con-
X
troller and press W to confirm.
To exit the menu: press the k back
X
button.
by turning cVd the

Rear view camera

Resetting all adjustments
Select the seat ( page 52).
X
Y
Select Reset All Reset All
X
COMAND controller and press W to con-
firm.
A prompt appears.
Select Yes Yes or No No and press W to confirm.
X
If you select No, the process will be can- No
celed.
After you select Yes, all seat adjustments Yes
are reset to the default values (factory set-
ting).
Rear view camera
The rear view camera is only an aid. It is not a
replacement for your attention to your imme-
diate surroundings. You are always responsi-
ble for safe maneuvering and parking. When
maneuvering or parking, make sure that there
are no persons, animals or objects in the area
in which you are maneuvering.
The image from the rear view camera is
shown in the COMAND display when reverse
gear is engaged if:
your vehicle is equipped with a rear view
R
camera
COMAND is switched on
R
the Activation by R gear Activation by R gear
R
activated.
If the function is activated, the COMAND dis-
play will automatically switch back to the pre-
by turning cVd the
function is
55