Reset Function - Mercedes-Benz COMAND Operating Instructions Manual

Reset function

44
Insert the SD memory card (
X
or
Connect a USB device (e.g. a USB memory
X
stick) ( page 168).
Y
Press the Ø button in the center con-
X
sole.
The Vehicle Vehicle
To select System Settings System
X
press the controller.
A menu appears.
To select Data Import/Export Data
X
press the controller.
Select Import Data Import Data
X
i
If you import data such as address data,
the existing data on COMAND is overwrit-
ten. You will see a message to this effect.
COMAND is restarted after the data import.
If PIN protection is activated, a PIN prompt
appears when you select
To enter the PIN: turn the controller and
X
press ¬ to confirm.
PIN protection is deactivated.
To select Memory Memory Card
X
turn and press the controller.
This function exports all the data to the
selected disc.
A window appears with the message that
the data has been exported.
You can export address data, bookmarks,
system settings that you have made and radio
station lists, for example. Personal music files
in the MEDIA REGISTER cannot be saved and
imported again using this function.
page 168).
Y
menu appears.
Settings: slide 6 and
Import/Export: turn and
or Export Export Data Data.
Export Export Data Data.
Card, USB 1 USB 1 or USB USB 2
Mercedes-Benz is not liable for any loss of
data.
Reset function
You can reset COMAND to the factory set-
tings. Amongst other things, this will delete
all personal COMAND data. These include:
Channel presets
R
Entries in the destination memory
R
Entries in the list of previous destinations
R
in the navigation system
Entries in the address book
R
Authorized telephone
R
In addition, an activated PIN protection,
which you have used to protect your data
against unwanted export, will be deactivated.
Resetting is recommended before selling or
transferring ownership of your vehicle, for
example.
Data on the internal hard drive, e.g. music
files in the MEDIA REGISTER, will be deleted.
Mercedes-Benz is not liable for any loss of
data.
Press the Ø button in the center con-
X
sole.
The Vehicle Vehicle
To select System Settings System
X
controller, turn and press to confirm.
A menu appears.
To select Reset: turn and press the con- Reset
X
troller.
2:
A prompt appears asking whether you wish
to reset.
Select Yes Yes or
X
If you select
If you select Yes Yes
asking whether you really wish to reset.
Select Yes Yes or
X
If you select
COMAND is reset to the factory settings
and restarted.
menu appears.
Settings: slide 6 the
No. No
No No the process is canceled.
a prompt will appear again
No. No
Yes Yes a message will be shown.