Night View Assist Plus; 360° Camera; Comand Display - Mercedes-Benz COMAND Operating Instructions Manual

360° camera
56
viously selected display as soon as you shift
out of reverse gear.
For further information on the rear view cam-
era, see the vehicle Operator's Manual.
Press the W button.
X
The system menu appears.
Select Settings Settings
X
COMAND controller and press W to con-
firm.
Select Rear View Rear View Camera
X
confirm.
Select Activation by R gear Activation by R gear
X
W to confirm.
The function is switched on O or off ª,
depending on the previous status.

Night View Assist Plus

On vehicles with Night View Assist Plus you
can have the image from Night View Assist
Plus shown on the COMAND display.
Switch on COMAND (
X
Activate Night View Assist Plus, see the
X
separate operating instructions.
The image from Night View Assist Plus
appears in the COMAND display.
To adjust the brightness: select
X
ness ness by turning cVd the COMAND con-
troller and press W to confirm.
Turn cVd the COMAND controller and
X
press W to confirm.
Switching automatic activation on/off:
X
select Night View Night
vation vation and press W to confirm.
Switch the option on O or off ª.
Option switched on: while using other func-
tions e.g. the navigation system, Night View
Assist Plus is active in the background. In
the dark, in unlit surroundings and at
speeds in excess of 37 mph (60 km/h), the
Night View image is automatically dis-
played as soon as pedestrians or animals
are detected.
by turning cVd the
Camera and press W to
and press
page 29).
Y
Bright‐ Bright‐
View Assist Assist Auto. Auto. Acti‐
To switch off the display: select
X
press W to confirm or press the k but-
ton.
360° camera
Important notes
The 360° camera is only an aid. It is not a
replacement for your attention to your imme-
diate surroundings. You are always responsi-
ble for safe maneuvering and parking. When
maneuvering or parking, make sure that there
are no persons, animals or objects in the area
in which you are maneuvering.
Overview
The 360° camera surveys the vehicle sur-
roundings and assists you, for example when
parking or at exits with reduced visibility.
The 360° camera images can be shown in full
screen mode or in seven different split-screen
views on the COMAND display. A split-screen
view also includes a top view of the vehicle.
This view is calculated from the data supplied
by the installed cameras (virtual camera).
Displaying the 360° camera image
The 360° camera image can be displayed if:
your vehicle is equipped with a 360° cam-
R
era
COMAND is switched on (
R
the 360° Camera 360° Camera
R
Acti‐
You can activate the 360° display by:
engaging reverse gear (only possible if the
R
Activation by R gear Activation by R gear
ted)
selecting the
R
the System System
pressing and holding the W function
R
button
page 29)
Y
function is activated
option is activa-
360° Camera 360° Camera menu item in
menu
Back Back and