Seat Functions - Mercedes-Benz COMAND Operating Instructions Manual

Seat functions

52
Calling up drive status regulator (ABC)
Press W.
X
In the system menu, slide ZV the
X
COMAND controller up until the display/
selection window is selected.
Slide XVY the COMAND controller repeat-
X
edly until the driving conditions menu
(ABC) appears.
The corresponding displays appear in the
COMAND display.
Details on the displays:
for all vehicles except AMG vehicles, see
R
the separate vehicle Operator's Manual
for AMG vehicles, see the separate vehicle
R
Operator's Manual.
Exiting the display
Slide XVY the COMAND controller until
X
the desired display (clock or fuel consump-
tion) is shown.
Seat functions
Overview
Using the T button next to the COMAND
controller or the Seat menu item in the sys-
tem menu, you can call up different setting
functions. The following settings depend on
the type of seat and the vehicle model series:
Seat cushion length
R
Backrest side bolsters
R
Lumbar
R
Balance
R
Seat cushion side bolsters
R
Dynamics
R
Massage
R
i
You can also store and recall the current
seat function settings using the memory
button and the corresponding memory
position switch; see the separate vehicle
Operator's Manual.
The massage function cannot be started or
stopped using the memory button.
Selecting the seat
First select the seat which you wish to adjust.
This function is not available for all vehicles.
Press the T or W button.
X
Select Seat Seat and press W to confirm.
X
To switch to the lower line, for both options
X
slide VÆ the COMAND controller.
Select Driver's Seat Driver's Seat
X
Seat Seat by turning cVd the COMAND con-
troller and press W to confirm.
Adjustment functions
Adjusting the seat cushion length
The availability of this function depends on
the type of seat and the vehicle model series.
This function allows you to adjust the height
of the seat cushion.
or Passenger Passenger