Information Center - Skier's Choice Supra Sunsport 20V Owner's Manual

Information Center

The Available Information is divided into manageable pages or screens and organized into a straightforward menu
structure for presentation to the driver. Display controls, conveniently located to the right of the helm, allow rapid navi-
gation of the menu structure to display the desired information.
The four buttons to the left of the Stereo Remote are Screen
Navigation buttons dedicated to the Instrument System
Screens:
• The SCROLL UP ARROW and SCROLL DOWN
ARROW buttons are used to navigate through the
screens, scroll through lists, and adjust stored values.
• The ENTER button is used to access sub-menu
screens, select an item in a list, and store new values.
• The BACK button is used to return from sub-menu
screens.
— 
The Info Center located in the center of the dash supports
many of the system's Key features:
• It is the graphical display for the embedded Perfect Pass
Speed Control System.
• It can digitally display: Speed, Engine RPM, Oil Pressure,
Coolant Temperature, Battery Voltage, Remaining
Fuel, Depth, Air Temperature, Water Temperature,
and Engine Hours.
• It allows access to Set Up Screens from which you can:
- Calibrate the speedometer.
- Adjust the Display Contrast.
- Select either English or Metric Units.
- Adjust the calibration of the Trim Gauge.
- Run Diagnostic Routines.
The four buttons to the right of the Stereo Remote are
dedicated to the Perfect Pass Speed ™ Control System.
Once the Speed Control System is activated by pressing
the ON/OFF button, the Info Center is dedicated solely to
the Perfect Pass™ system until it is turned off.
• The ON/OFF button is used to turn the speed
control system on and off.
• The SCROLL UP ARROW/SELECT and SCROLL
DOWN/EDIT ARROW buttons are used to adjust
stored values, select settings, and edit settings.
• The NEXT button is used to move around within a
screen and scroll through lists.
© 2008 Skier's Choice, Inc. © 2008 Skier's Choice, Inc.