Skier's Choice Supra Sunsport 20V Owner's Manual page 37

Set Up Procedures (continued)
Contrast Adjustment
1. With the Info Center in Instrument System Mode, use
the SCROLL UP ARROW or SCROLL DOWN
ARROW buttons to display the Set Up screen.
2. Push the Enter button to display the Set Up
Menu screen.
3. Use the SCROLL UP ARROW or SCROLL DOWN
ARROW buttons to highlight the Contrast line in
the menu.
4. Push the Enter button.
Once the Enter button is pushed, the highlighted line will
start flashing on and off indicating that the system is in
data entry mode.
The Contrast is set at 12 at the factory. Lowering
that number will make the screen appear lighter
and increasing that number will make the screen darker.
5. Use the SCROLL UP ARROW or SCROLL DOWN
ARROW buttons to adjust the contrast to the
desired level.
Changes in the contrast take effect immediately, so you
can see the effect on the display as you make
the adjustment.
6. Push the Enter button to store the new value. The
Contrast line will stop flashing.
7. Push the Back button to exit the Set Up Menu screen.
Unit Selection
1. With the Info Center in Instrument System Mode, use
the SCROLL UP ARROW or SCROLL DOWN
ARROW buttons to display the Set Up screen.
2. Push the Enter button to display the Set Up
Menu screen.
3. Use the SCROLL UP ARROW or SCROLL DOWN
ARROW buttons to highlight the Units line in
the menu.
4. Push the Enter button.
Once the Enter button is pushed, the highlighted line will
start flashing on and off indicating that the system is in
data entry mode.
5. Use the SCROLL UP ARROW or SCROLL DOWN
ARROW buttons to toggle between English and Metric
Units.
6. Push the Enter button to store the new value. The
Units line will stop flashing.
© 2008 Skier's Choice, Inc. © 2008 Skier's Choice, Inc.
Unit Selection (continued)
7. Push the Back button to exit the Set Up Menu screen.
The following parameters change in value in response
to a change in units:
Depth
Air Temperature
Lake Temperature
Running System Diagnostics
1. With the Info Center in Instrument System Mode, use
the SCROLL UP ARROW or SCROLL DOWN
ARROW buttons to display the Set Up screen.
2. Push the Enter button to display the Set Up
Menu screen.
3. Use the SCROLL UP ARROW or SCROLL DOWN
ARROW buttons to highlight the Service line in
the menu.
4. Push the Enter button.
The Service screen will be displayed.
5. Use the SCROLL UP ARROW or SCROLL DOWN
ARROW buttons to highlight the Gauge line in the menu.
6. Push the Enter button. The Gauge line will start flashing.
7. Use the SCROLL UP ARROW or SCROLL DOWN
ARROW buttons to select between the NORM,
SWEEP, FULL, and ZERO options.
8. Push the Enter button to activate the selected
gauge exercise routine.
Note: Once the exercise routine is initiated, it will
run until the NORM option is once again selected or
until the Back button is pushed to exit the
Service screen.
9. Pushing the Back button again will exit the Set Up Menu
screen.
Digital Speed
Oil Pressure
Coolant Temperature
 —