Skier's Choice Supra Sunsport 20V Owner's Manual page 48

Rad-A-Cage
If your Supra model has been equipped with an optional RAD-A-CAGE
towing tower, please review this section for details on it's usage, mainte-
nance and storage. The cage is designed as a stable tower to enhance
wakeboarding. It is NOT intended to be used to tow skiers, barefoot ski-
ers, or multiple wakeboarders. Such use will void any warranties written
or implied.
Before use, be sure that all mounting bolts are properly tightened
in place.
Be aware of and avoid low overhead objects such as bridges, power
lines, overhanging trees, etc.
To Raise Cage
- Lift the tower and swing up the rear legs. Install the four
hand knobs.
The threads in the aluminum foot could be damaged if the
bolts are not aligned and threaded correctly.
The Rad-A-Cage is designed to pull a single (1) wakeboarder,
trick skier, or kneeboarder.
NOTE: Apply a thin coat of anti-seize to the threads of the
hand knobs periodically.
— 
To Lower Cage for Storage
- Remove the four hand knobs from the top of the rear
leg. While holding the tower up, lower the side legs.
Then lower the tower downward into the boat.
© 2008 Skier's Choice, Inc. © 2008 Skier's Choice, Inc.