Information Center - Skier's Choice Supra Instruction Manual

Information Center

The Available Information is divided into manageable pages or screens and organized into a straightforward menu structure for
presentation to the driver. Display controls, conveniently located to the right of the helm, allow rapid navigation of the menu
structure to display the desired information.
The four buttons to the left of the Stereo Remote are Screen
Navigation buttons dedicated to the Instrument System
Screens:
• The SCROLL UP ARROW and SCROLL DOWN ARROW buttons
are used to navigate through the screens, scroll through lists,
and adjust stored values.
• The ENTER button is used to access sub-menu screens, select
an item in a list, and store new values.
• The BACK button is used to return from sub-menu screens.
— 3
The Info Center located in the center of the dash supports many of the
system's Key features:
• It is the graphical display for the embedded Perfect Pass Speed Control
System.
• It can digitally display: Speed, Engine RPM, Oil Pressure, Coolant
Temperature, Battery Voltage, Remaining Fuel, Depth, Air Temperature,
Water Temperature, and Engine Hours.
• It allows access to Set Up Screens from which you can:
- Calibrate the speedometer.
- Adjust the Display Contrast.
- Select either English or Metric Units.
- Adjust the calibration of the Trim Gauge.
- Run Diagnostic Routines.
The four buttons to the right of the Stereo Remote are dedicated
to the Perfect Pass Speed ™ Control System. Once the Speed
Control System is activated by pressing the ON/OFF button,
the Info Center is dedicated solely to the Perfect Pass™ system
until it is turned off.
• The ON/OFF button is used to turn the speed control system
on and off.
• The SCROLL UP ARROW/SELECT and SCROLL DOWN/EDIT
ARROW buttons are used to adjust stored values, select
settings, and edit settings.
• The NEXT button is used to move around within a screen
and scroll through lists.
© 2009 Skier's Choice, Inc.