Skier's Choice Supra Sunsport 20V Owner's Manual page 36

Info Center Screen Descriptions
Main Screen
The Main Screen displays digital speed and engine RPM in
a large font size.
The indicated speed may be displayed in either English or
Metric units as selected in the Set Up Menu screen.
Engine Screen
The Engine Screen displays engine oil pressure, engine
coolant temperature, battery voltage, and the percentage of
fuel remaining.
The oil pressure and coolant temperature may be displayed
in either English or Metric Units as selected in the Set Up
Menu screen.
Depth - Temperature Screen
The Depth — Temperature Screen displays depth of the water
under the boat, the air temperature, the water temperature,
and the total engine hours.
The depth, lake, and air temperature may be displayed in
either English or Metric Units as selected in the Set Up Menu
screen.
— 
Set Up Screen
The Set Up Screen is the gateway to the Set Up sub-menu
from which you can adjust the displays contrast, select the
desired display units, calibrate the Trim Gauge, and run di-
agnostic routines.
From the Set Up screen, push the Enter button to display the
Set Up Menu screen.
Set Up Procedures
Note: All system set up parameters are pre-set at the factory
and normally do not require adjustment in the field.
Speedometer Calibration
1. With the Info Center in Instrument System Mode, use
the SCROLL UP ARROW or SCROLL DOWN
ARROW buttons to display the Main screen.
2. Push and hold the Enter button for 3 seconds to display
the Speedo Calibration screen.
3. While holding a constant speed compare the
displayed speed against your standard (stop watch
or GPS) and use the SCROLL UP ARROW or
SCROLL DOWN ARROW buttons to adjust the
displayed speed to agree with the standard.
4. Once the speeds are in agreement push the Enter
button to store the calibration and return to the
Main screen.
© 2008 Skier's Choice, Inc. © 2008 Skier's Choice, Inc.