Operation Of Remote Control Unit; Loading Batteries; Operation - Kenwood DPF-J3030 Instruction Manual

Operation of remote control unit

1
CONFIRM
A B C
BEST
SELECTION REPEAT RANDOM
2
D E F
1
2 3
H I J
5 6 7
L M N
9 0 +10
P Q R
– .
/
T U V
3
DISC
SELECTOR
)
(
X Y Z
DELETE SPACE CHARAC.
/CLEAR /CHECK /P.MODE
DISC SKIP
DOWN UP
7
CURSOR CHARACTER
4
LEFT RIGHT DOWN
1 ¡ 4
REMOTE CONTROL UNIT
RC-P0714
Model: RC-P0714
Infrared ray system

Loading batteries

1 Remove the cover.

Operation

After plugging in the power cord, press the POWER (
key of the main unit to turn the power ON. When the power
is turned ON, press the key of the function to be operated.
÷ When pressing more than one remote control key successively, press
the keys securely by leaving an interval of 1 second or more between
keys.
1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.
2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.
Notes Notes
3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light
sensor. In such a case, change the system installation position to prevent the malfunction.
The keys with the same name as those on the main unit operate the same way as on the main unit.
The keys marked
1 Input keys for numbers and letters *
Used for selection of disc numbers and
track numbers, as well as for character
input.
5
POWER
2 Keys related to playback mode and
DISPLAY
display
G
CONFIRM key
4
* BEST SELECTION key
K
Used for best selection registration and
8
O
playback.
+100 REPEAT key
S
RANDOM key
' DISPLAY key
W
3 Disc selection keys
MODE
6 * DISC SELECTOR key
Press to select a disc number.
SET
DISC SKIP(DOWN/UP) keys
ENTER
4 Keys for basic operation and char-
6
acter input
UP
¢
Stop(7) key
ENTER; Play/pause(6) key
CHARACTER (DOWN/UP);
Skip (4/¢) keys
*
CURSOR(LEFT/RIGHT);
Search(1/¡) keys
Press to move the played position of disc
at high speed. Used as cursor keys at the
time of character input.
2 Insert batteries.
÷ Insert two AA-size (R6) batteries as
indicated by the polarity marking.
*
are provided only on the remote control unit.
)
5 POWER (
) key
6 Keys related to program and file
registration
*
MODE key
Press to switch the mode.
* SET key
Used for confirmation of mode settings. At
the time of character input, one character is
confirmed and the cursor goes to the next
digit.
* ENTER key
Used for title confirmation.
* CHARAC./P.MODE key
Used for playback mode switching. At the
time of character input, this key switches
between capital letters/small letters/num-
bers and special characters.
* SPACE/CHECK key
Used to confirm the entered contents.
Inserts a space at the time of character
input.
*
DELETE/CLEAR key
Used to delete the entered contents. At
the time of character input, characters are
deleted.
3 Close the cover.
Remort control
light sensor
6m
30 30
Operating range
(approx.)
REMOTE CONTROL UNIT
RC-P0714
9