Disc handling precautions
Maintenance of the unit
When the front panel or case becomes dirty, wipe with a soft, dry
cloth. Do not use thinner, benzine, alcohol, etc. for these agents may
Caution on condensation
Condensation (of dew) may occur inside the unit when there is a
great difference in temperature between this unit and the outside.
This unit may not function properly if condensation occurs. In this
case, leave the unit for a few hours with the power left ON, and
restart the poeration after the condensation has dride up.
Be specially cautious against condensatin in a following
When this unit is carried from a place to another across a large
difference in temperature, when the humidity in the room where
this unit is installed increases, etc.
Memory backup function
Stored contents for at least
3 weeks after power plug is
unplugged from the AC out-
Hold the discs so that you do not touch the
Do not attach paper or tape to either the play-
ing side or the label side of the discs.
If fingerprints or foreign matter become at-
tached to the disc, lightly wipe the disc with
a soft cotton cloth (or similar) from the cen-
ter of the disc outwards in a radial manner.
When a disc is not to be played for a long
period of time, remove it from the player and
store it in its case.
Power status (ON or OFF),
Title registration contents
Music type registration contents
User file registration contents
Best selection registration contents
Discs which can be played with this unit
CD (12 cm), and the audio part of CDV, CD-G, CD-EG and CD-EXTRA.
Use discs that comply with the IEC standard, for example a disc carrying
marking on the label surface.
÷ An 8 cm CD cannot be played back.
Never play a cracked or warped disc
During playback, the disc rotates at high speed in the player.
Therefore, to avoid danger, never use a cracked or deformed disc or a
disc repaired with tape or adhesive agent.
Please do not use discs which are not round because they may cause a
The disc accessories (stabilizer, protection sheet, protection ring, etc.)
which are marketed for improving the sound quality or protecting discs
as well as the disc cleaner should not be used with this system because
they may cause malfunction.
In regard to contact cleaner
Do not use contact cleaners because it could cause a malfunction.
Be specially careful not to use contact cleaners containing oil, for
they may deform the plastic component.
Note related to transportation and movement
Before transporting or moving this unit, carry out the following op-
1. Remove all discs from the carousel and close the door panel.
2. Confirm that the flashing "NO DISC" display has changed to steady
lighting, and then switch off the power.
3. Wait a few seconds, then disconnect the power plug.
tion has determined that this products meets the
This product can save energy. Saving energy re-
duces air pollution and lowers utility bills.
TAR ® Partner, Kenwood Corpora-
TAR ® guidelines for energy efficiency.