Operation Of Remote Control Unit - Kenwood CD-403 Instruction Manual

Operation of remote control unit

8
DISC
SELECTOR
1
1 2
2
4 5
3
7 8
4
P.MODE 0
5
EDIT CLEAR
TIME
SKIP
DISP.
REPEAT RANDOM
OUTPUT
DOWN UP
REMOTE CONTROL UNIT
REMOTE CONTROL UNIT
RC-P0711
RC-P0601
Loading batteries
1 Remove the cover.
Operation
After plugging in the power cord, press the ON/STANDBY (POWER/
) key of the main unit to turn the power ON. When the unit is
turned ON, press the key of the function to be operated.
÷ When pressing more than one remote control key successively, press
the keys securely by leaving an interval of 1 second or more between
keys.
1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.
2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.
Notes Notes
3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light sensor. In
such a case, change the system installation position to prevent the malfunction.
The keys with the same name as those on the main unit operate the same way as on the main unit.
The keys marked * are provided only on the remote control unit.
1 DISC SELECTOR keys
2 DISC SKIP key
POWER
3 Program-related and other keys
3
RANDOM key
6
REPEAT key
P.MODE key
9
TIME DISP. key
+10
* EDIT key
CHECK key
CHECK
CLEAR key
2 Insert batteries.
÷ Insert two AA-size (R6) batteries as
indicated by the polarity marking.
(Except for CD-403/DPF-R3030)
0 *4 OUTPUT (DOWN, UP) keys 5
9
5 POWER key
^
*6 Numeric keys (1 ~ 0, +10)
&
#
7 Basic function keys
@
(
Stop key (7)
$
Play/Pause key (6)
%
Skip (4/¢) keys
Search keys (1/¡)
3 Close the cover.
Remote control
light sensor
DISC
SELECTOR
1
1
2
4
3
7
4
P.MODE
5
EDIT CLEAR
TIME
SKIP
DISP.
REPEAT RANDOM
OUTPUT
DOWN UP
REMOTE CONTROL UNIT
RC-P0601
9
!
0
0
!
!
POWER
Operating range
2 3
5 6
(Approx.)
8 9
0 +10
CHECK